6.02.2010

Refinishing the floors: Part 2

After all of the prep and sanding, we were finally ready to poly the floors on Sunday night. We chose a water-based polyurethane in a semi-gloss from Behr. I wanted to use a water-based poly because it dried quickly and did not really have much of an odor.

Unfortunately....the tool rental guy that we purchased the poly from was not aware that 1. it was the last gallon at their Home Depot and 2. the reason it was their last gallon...because the product was being discontinued. We did not realize issue one or two until we needed another gallon the next day.

The poly was put down with a lambswool pad. We thought we could get away with not sanding and re-cleaning the floors between coats, but after the second coat we realized we really should sand. While the Dude was out looking for more poly, I went to our local Ace Hardware to get the sand paper, sandpaper pad attachment, a scraper for the corners (the edge sander could not get in the corners) and a microfiber cloth.

The Dude secured two more gallons (one extra for "just in case") and we put down two more coats with sanding in between.

Now we have to wait 72 hours after the last coat for the floors to cure. Ugh, I can't wait to get the room and house back in order!!

Sorry for the crappy iPhone pictures...

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

The next post will be lessons learned and other fun tips! Wheee!

6 comments:

  1. They look gorgeous!! I'm very impressed with the floor refinishing skills!

    ReplyDelete
  2. You did a great job! The floor looks fabulous and not at all low-expectationish. Congratulations.

    ReplyDelete
  3. The before and after on these floors is astounding. So jealous that you didn't have to stain, the color of your wood is beautiful!

    ReplyDelete
  4. Shanks, guys.

    Sara, we were super lucky that we did not have to stain the floors. Ugh, that would have added days to the process.

    ReplyDelete